You will definitely ask these questions, when you hear about the device ANESA
How does the divice measure the parameters?
Briefly speaking, determination is based on measurement of temperature in certain biologically active points of a human body, accounting other initial data about a patient and parameters of environment as well. All the information is analyzed by the software USPIH, according to the special mathematical algorythm. The rersults are generated into a report/survey with more than 100 parameters of health state (example of a survey). The methodology, main algorithm of calculation and correlations, described in the patents, were tested and corrected during the device's development, in accordance with real processes in a human organism. Unfortunately, we couldn’t give such kind of information to anybody else, because it’s our know-how.
Could the results of test on a device ANESA be used instead of classical laboratory blood test?
First of all, let me pay your attention to the one important thing - our analyzer is screening diagnostic system, which does not replace laboratory.Testing a person with the Analyzer ANESA, a doctor will get the info about the state of an organism in general and particularly in different systems.
Who can use the device ANESA?
ONLY DOCTORS can use the device ANESA. Moreover, all users/doctors should be trained specialy. The device seems to be very easy to use...But, it is necessary to note, if a doctor wasn't trained, he/she isn't able to use the device properly. In case the sensors are put not correct, the results in the report will be wrong and couldn't be analyzed. Also, this is the one of reasons why we require only doctors as users of the device. A person without medical background will not understand if the received report is useful or not (if it is necessary to correct the sensors placing and make the test again or not, etc.).
Where could the device be used?
Mainly private doctors or family doctors use our devices in their work. Mainly, because they need the information about the state of a patient's health fast. So, a doctor receives quick answer and decides what to do: he can send a patient to a laboratory for verification; or send him/her to a hospital, in case of serious situation with health; or prescribes a medicine and then monitors the process of treatment.
At the same time, the device is successfuly used in hospitals, clinics, medical research institutes, sanatoriums and wellness centers.
Where is the device being worked?
Our devices work in Europe (Hungary, Slovakia, Slovenia, Netherland, Czech Republic, Serbia, Romania, Italy, Austria, Spain, Greece, Spain), China, Egypt, Latin America (Mexico, Columbia, Equador, Salvador), Russia, Belorussia, Kazakhstan.
What is the metrological traceability of the device?
Our device ANESA uses 64-bit microprocessors DS18D20, manufactured by Dallas Semiconductor/Maxim Integrated Products (USA) for the temperature measurements. The manufacturer of microprocessors calibrates every single DS18B20 to ensure the accuracy of the temperature readings (units in K), in accord with the published datasheet. Each individual chip is adjusted as necessary to bring it into compliance. The production test equipment is calibrated using standards that are traceable to NIST (the official letter from Maxim Integrated Products Co. is here).
Our engineers make additional control of each purchased batch of microprocessors, according to specialy developed methods and procedure of temperature verification .
At the same time, we need to note, that any metrological verification couldn’t be applicable for the parameters in our tests, because all of them are mathematically determined, and not measured (the same concerns biochemical equipment in laboratories: no one parameter of blood can be verified by metrological methods).
